GuangZhou SunFieldAimo Electronic Technology Co. Ltd CG-3015 Manuale Utente

Controller Description

© 2016 Cine Gears INC. All Rights Reserved.

11

 

While in the manual mode you can establish up to 3 set points along the cable.  Press Reset to clear 

 

the set points.

 

Use the controller to move the Pegasus (see "Speed Knob") to the desired set point along the path of 

 

motion.To save that set point, simply hold either the Left (1), Right (2) , or Down (3) arrow for 3 seconds.

 

To save the next set point simply move the cable cam to the next desired location on the cable, and hold 

 

down either Left (1), Down (2), or Right (3), depending on which save slots are empty; if a set point is 

 

established for a button, and the user moves the Pegasus and holds down the same button, the new set 

 

point position will override the older set point.  

 

To get the Pegasus to travel to its set points, simply press (not hold) the desired set point (i.e., 1,2, or 3).  

 

To reset all the set points, hold the Up (reset) Button.

 

The Speed Knob is a bi-directional, pressure sensitive manual toggle. Used primarily with Manual Mode. 

 

Press left or right to dictate the movement of the cable cam/trolley: the speed of the motion is controlled 

 

by the pressure of the finger against the button.

 

In Auto mode this button will start and stop the recording program.  In Manual mode this button will start 

 

and stop basic recording. Do not hold the Start/Photo button: simply press it once.

 

Sends the Auto mode settings information to the Pegasus housing.

 

Once Auto program parameters are established, hold the Download Button for 3 seconds to transmit the 

 

instructions to the motor. Once sent, press the Start/Photo button to begin cycle. A single click of the 

 

Download Button will turn off the LED screen light.

 

Standardized USB charging port