GuangZhou SunFieldAimo Electronic Technology Co. Ltd CG-3015 Manuale Utente
Setting Up the Cable Cam
© 2016 Cine Gears INC. All Rights Reserved.
13
Mounting the Body to the Cable
1. To mount the Pegasus to the cables, begin by removing the large and small rubber wheels from the
body, as well as any stabilizer arms: these rubber wheels and stabilizer arms are for ground use only.
body, as well as any stabilizer arms: these rubber wheels and stabilizer arms are for ground use only.
2. Once the rubber wheels are removed, use a 3/8" Allen key to remove the bottom two wheels of one side
of the Pegasus body.
of the Pegasus body.
3. Place the side of the Pegasus with removed wheels onto the cable: the largest wheel rests on top of the
cable, as well as the two smaller wheels not removed.
cable, as well as the two smaller wheels not removed.
4. Reattach the wheels with the cable running along their top side, so the cable is pinched between the two
smaller wheels on either side. If using a double cable system, remove the two small wheels from the other
side of the body and repeat the aforementioned process of locking the cable between the small wheels of
the body.
smaller wheels on either side. If using a double cable system, remove the two small wheels from the other
side of the body and repeat the aforementioned process of locking the cable between the small wheels of
the body.
5. To remove the Pegasus from the cable, unlock and remove the bottom two smaller wheels of the body
and slide out the cable.
and slide out the cable.