Kwikbit Inc. PTP55DP Manuale Utente
M4-2000
User Guide
Kwikbit M4-2000 User Guide
Confidential & Proprietary
- 30 -
5.1.3 Pre-Configuring the M4-2000
Summary of minimum configuration prior to field installation of a M4-2000:
• change root password from default
• configure IP address
• Role (primary or secondary)
• Role (primary or secondary)
• Enable airlink auto-start on boot (Primary device only)
• Enable DCS Mode
• Enable DCS Mode
• The following must match on primary and secondary:
o
Link ID
o
Starting frequency for Radio 1 (UL and DL)
o
Channel Bandwidth
o
channel plan
These configuration items are set via the following detailed instructions:
1. From the M4-2000’s web management menu, select Users on the left navigation under the
Security section. The User Configuration page is displayed below:
2. Click on the root user and the Edit User window will open up
3. Set a new password for root by entering a password and confirming in the appropriate
fields. Click on Submit
4. If desired at this stage, an additional user can be added. Select Add New User and follow the
instructions in the Edit User window
5. From the navigation menu on the left, under the Configuration section, select Radio Link.
The Radio Link Configuration page will be displayed: