Panasonic Corporation of North America 96NKX-TGA660 Manuale Utente
2
Changing the handset name
Each handset can be given a
customized name (“Bob”,“Kitchen”, etc.).
This is useful when you make intercom
calls between handsets. You can also
select whether or not the handset name
is displayed in standby mode. The
default setting is“Off”. If you select
“On” without entering any handset
name, “Handset 1” to “Handset 6”
is displayed.
customized name (“Bob”,“Kitchen”, etc.).
This is useful when you make intercom
calls between handsets. You can also
select whether or not the handset name
is displayed in standby mode. The
default setting is“Off”. If you select
“On” without entering any handset
name, “Handset 1” to “Handset 6”
is displayed.
1
MMENUN M#N M1N M0N M4N
2
Enter the desired name (max. 10
characters; see the character
table,page 22).
R If not required, go to step 3.
characters; see the character
table,page 22).
R If not required, go to step 3.
3
MSAVEN
4
MCN / MDN: Select the desired setting.
A MSELECTN
A MSELECTN
5
MSELECTN A MOFFN
Call block (Caller ID
subscribers only)
subscribers only)
This feature allows the unit to reject calls
when:
– the unit receives a call from a phone
when:
– the unit receives a call from a phone
– the unit receives a call without phone
number (“Block calls without phone
number”, page 34).
number”, page 34).
When a call is received, the unit rings for
a short time while the caller is being
identified. If the phone number matches
an entry in the call block list, the unit
sends out a busy tone to the caller, and
then disconnects the call.
a short time while the caller is being
identified. If the phone number matches
an entry in the call block list, the unit
sends out a busy tone to the caller, and
then disconnects the call.
Important:
R When the unit receives a call from a
R When the unit receives a call from a
number that is stored in the call block
list or a call without a recognized
phone number, the call is logged in
the caller list (page 36) with after
the call is disconnected.
list or a call without a recognized
phone number, the call is logged in
the caller list (page 36) with after
the call is disconnected.
Storing unwanted callers
You can store up to 30 phone numbers
in the call block list by using the caller
list or by entering the numbers directly.
You can store up to 30 phone numbers
in the call block list by using the caller
list or by entering the numbers directly.
Important:
R We recommend storing 10 digits
R We recommend storing 10 digits
(including an area code). If only 7
digits are stored, all numbers that
have the same last 7 digits will be
blocked.
digits are stored, all numbers that
have the same last 7 digits will be
blocked.
n
From the caller list:
1
MFN CID
2
MCN / MDN: Select the entry to be
blocked.
R To edit the number, press
blocked.
R To edit the number, press
MEDITN repeatedly until the
phone number is shown in the
10-digit format.
phone number is shown in the
10-digit format.
3
MSAVEN
4
MCN / MDN: “Call block” A
MSELECTN
MSELECTN
5
MCN / MDN:“Yes” A MSELECTN
6
Edit the phone number if
necessary (24 digits max.).
necessary (24 digits max.).
7
MSAVEN A MOFFN
n
By entering phone numbers:
1
MMENUN M#N M2N M1N
M7NAMADDN
M7NAMADDN
2
Enter the phone number (24
digits max.).
R To erase a digit, press
digits max.).
R To erase a digit, press
MCLEARN.
3
MSAVEN A MOFFN
For assistance, please visit http://www.panasonic.com/help
33
Programming