Bionime Corporation GM232 Manuale Utente

23

22

Turning On/ Off the Bluetooth

1. Auto turn on the Bluetooth
  After leaving the Setting mode, the Bluetooth will turn on automatically and the 

"  " symbol blinks on the screen.

2. Turn off the Bluetooth
  In Time mode, press and hold the Right or Left button for two seconds. The 

blinking "   " symbol will switch to the “       “ symbol with a beep (If Volume is 
turned on).

3. Manual turn on the Bluetooth
    In Time mode, press and hold the Right or Left button for two seconds. The 

“         “ symbol will switch to the blinking “        “ symbol with a beep (If Volume is 
turned on).

1)

2)

NOTE
1.The blinking 

 symbol should turn to steady immediately when 

the Bluetooth connection is established. 

2. Blinking back and forth “       “ symbol on the screen means the 

meter is transferring data.

“       “ 

1

2

Handling the GE006 Blood Glucose Test Strip

How to handle the GE006 Blood Glucose Test Strip.

Inserting the GE006 Blood Glucose Test Strip:
1. Hold the GE006 Blood Glucose Test Strip between your thumb and middle 

finger with the view window "        " facing up.

2. Put your forefinger on the side of the strip as shown. 

3. Insert the GE006 Blood Glucose Test Strip into test strip port until it clicks 

and firmly stops.

1

2

3