Bionime Corporation GM232 Manuale Utente

10

9

7

27

26

6

Performing a Blood Glucose Test

1. Hold the depth adjustable cap in one hand and hold the base 

with the other hand. Bend the cap down. When a gap 
appears between the cap and base, pull the cap and base in 
opposite directions.

2. Pull off the depth adjustable cap.

3. Insert a new disposable lancet firmly into lancet carrier.

4. Twist off and set aside the protective cover of the disposable 

lancet.

5. Replace the depth adjustable cap.

6. Choose a depth of penetration by rotating the top portion of 

the depth adjustable cap until your desired setting is visible 
in the window. Settings are based on skin type "          " for 
soft or thin skin;  "          "  for average skin;  "          " for thick or 
calloused skin. 

1

2

3

4

5

Performing a Blood Glucose Test

7. Hold the base in one hand and pull on the plunger with the 

other hand. The device will be cocked. Release the plunger 
and it will automatically move back to its original position 
near the base.

8. Wash your hands with warm soapy water and dry 

thoroughly.

9. Take one GE006 Blood Glucose Test Strip from the vial. 

Close the vial cap immediately.

10. Insert the strip into the test strip port of the GE006 Blood 

Glucose Meter with the view window facing up.

11. Once the strip is inserted, all symbols will appear on your 

meter display and will be accompanied by a beep (if 
volume is turned on).

8

NOTE
- The 

will automatically detect the Code 

number on the strip. You do not have to check the Code number on 
the meter display and strip vial.

GE006 Blood Glucose Meter 

11