ICOM 269800 Manuale Utente

4

1

PANEL DESCRIPTION

yKEY INDICATORS

Indicate the function(s) of the front panel keys directly
below the function display.

uSKIP INDICATOR (p. 41)

Appears when the displayed memory channel is specified
as a skip channel.

iMEMORY INDICATOR (p. 24)

Appears when memory mode is selected.

oMEMORY CHANNEL NUMBER INDICATORS 

➥ Shows the selected memory channel number. (p. 24)

➥ “C” appears when the call channel is selected. (p. 35)

!0S/RF INDICATORS

➥ Shows the relative signal strength while receiving sig-

nals. (p. 13)

➥ Shows the output power level while transmitting. (p. 15)

!1BUSY INDICATOR (p. 13)

➥ Appears when a signal is being received or the squelch

is open. 

➥ Flashes while the monitor function is activated. 

!2AUTO POWER-OFF INDICATOR (p. 64)

Appears while the auto power-off function is in use.

!3PRIORITY WATCH INDICATOR (p. 44)

Appears while the priority watch is activated; blinks while
the watch is paused.

!4DIGITAL INDICATOR (p. ??)

Appears when digital mode is selected.

!5LOCK INDICATOR (p. 12)

Appears when the lock function is activated.

!6TONE INDICATORS

➥ “ ” appears while the subaudible tone encoder is in

use. (p. 17)

➥ “ ” appears while the tone 

(CTCSS)

squelch function is

in use. (p. 48)

➥ “ ” appears while the tone 

(DTCS)

squelch function is

in use. (p. 48)

➥ “ ” appears with the “ ” or “ ” indicator while the

pocket beep function 

(CTCSS or DTCS)

is in use. (p. 48)

!7DUPLEX INDICATORS (p. 17)

“+” appears when plus duplex, “–” appears when minus
duplex operation is selected.