Справочник Пользователя для ICOM 269800
4
1
PANEL DESCRIPTION
1
yKEY INDICATORS
Indicate the function(s) of the front panel keys directly
below the function display.
below the function display.
uSKIP INDICATOR (p. 41)
Appears when the displayed memory channel is specified
as a skip channel.
as a skip channel.
iMEMORY INDICATOR (p. 24)
Appears when memory mode is selected.
oMEMORY CHANNEL NUMBER INDICATORS
➥ Shows the selected memory channel number. (p. 24)
➥ “C” appears when the call channel is selected. (p. 35)
!0S/RF INDICATORS
➥ Shows the relative signal strength while receiving sig-
nals. (p. 13)
➥ Shows the output power level while transmitting. (p. 15)
!1BUSY INDICATOR (p. 13)
➥ Appears when a signal is being received or the squelch
is open.
➥ Flashes while the monitor function is activated.
!2AUTO POWER-OFF INDICATOR (p. 64)
Appears while the auto power-off function is in use.
!3PRIORITY WATCH INDICATOR (p. 44)
Appears while the priority watch is activated; blinks while
the watch is paused.
the watch is paused.
!4DIGITAL INDICATOR (p. ??)
Appears when digital mode is selected.
!5LOCK INDICATOR (p. 12)
Appears when the lock function is activated.
!6TONE INDICATORS
➥ “ ” appears while the subaudible tone encoder is in
use. (p. 17)
➥ “ ” appears while the tone
(CTCSS)
squelch function is
in use. (p. 48)
➥ “ ” appears while the tone
(DTCS)
squelch function is
in use. (p. 48)
➥ “ ” appears with the “ ” or “ ” indicator while the
pocket beep function
(CTCSS or DTCS)
is in use. (p. 48)
!7DUPLEX INDICATORS (p. 17)
“+” appears when plus duplex, “–” appears when minus
duplex operation is selected.
duplex operation is selected.