ICOM 269800 Manuale Utente

24

5

■ General description

The transceiver has 207 memory channels including 6 scan
edge memory channels (3 pairs), and 1 call channel. Each of
these channels can be individually programmed with operat-
ing frequency (pgs. 9, 10), duplex direction (p. 19) and offset
(p. 21), subaudible tone encoder or tone squelch and its tone
frequency (pgs. 19, 48–50) and skip information* (p. 41). 
In addition, a total of 10 memory banks, A to J, are available
for usage by group, etc.

*except for scan edge memory channels.

■ Memory channel selection

D Using the tuning dial

q Push  [M/CALL

once or twice to select
memory mode.

• “M” indicator appears

w Rotate  [DIAL] to select

the desired memory
channel.

• Programmed memory

channels only can be se-
lected.

D Using the [Y]/[Z] keys

z Push [MR/CALL] to select memory mode.
x Push [Y

Y] or [Z

Z] to select and set the desired

memory channel.

• Pushing [Y

Y]/[Z

Z] for 1 sec. activates a scan.

• If scan is activated, push [Y

Y]/[Z

Z] again or push

A(MW)] to stop it.

D Using the keypad

z Push [MR/CALL] to select memory mode.
x Push [

C(T-OFF)] to activate the keypad

for numeral input.

c Push 3 appropriate digit keys to input a chan-

nel number. 

• When inputting non-programmed channel num-

bers, the previous memory channel appears.

• Push only 1 appropriate digit key, [

1(ANM)],

2(T-SCAN)] or [

3(PTT-M)], then push

[M

M(TONE-1)] or [

Z

Z

#(16KEY-L)] to select scan

edge channels. “M

M” and “#” can be used for “A”

and “b” respectively.

MR/CALL

Y/Z

MR/CALL

Y/Z

[DIAL]

Appears