ICOM 269800 Manuale Utente

25

5

MEMORY OPERATION

■ Programming a memory channel

VFO settings, including the set mode contents such as sub-
audible tone frequency, etc., can be programmed into a mem-
ory channel.

q Set the desired frequency in VFO mode.

➥ Push [V/MHz

] to select VFO mode.

➥ Set the frequency using [DIAL].

➥ Set other data (e.g. tone frequency, duplex information,

etc.) if required.

w Push [S.MW

] momentarily.

• “M” indicator and the memory channel number blink.

e Rotate [DIAL] to select the memory channel to be pro-

grammed.

• Memory channels not yet programmed are blank.

r Push [S.MW

] for 1 sec. to program.

• 3 beeps sound
• Memory channel number automatically increases when contin-

uing to push [S.MW

] after programming.

✔CONVENIENT
Memory programming can be performed in versatile ways
e.g. memory channel to the same (or different) memory chan-
nel, memory channel to the call channel, etc.

[EXAMPLE]: Programming 145.870 MHz into memory channel 20 (blank channel) via the front panel.

(   )

Push

Rotate            for setting frequency, etc.

Push          momentarily.

Rotate

Push          for 1 sec. 
and continue to push 

➠

Beep

Beep

Beep

“

“

“

“

“