ICOM 288800 Manuale Utente
78
9
SCAN OPERATION
■ Memory bank scan
IMPORTANT!: To perform memory bank scan, 2 or more
bank channels MUST be programmed, otherwise the scan
will not start.
bank channels MUST be programmed, otherwise the scan
will not start.
q Push [MR/S.MW] several times to select memory bank
mode.
w Set the squelch level.
e While pushing and holding [2/SCAN], rotate [DIAL] to se-
e While pushing and holding [2/SCAN], rotate [DIAL] to se-
lect the desired scanning type.
• “ALL” for all bank scan; “BANK-LINK” for bank link scan or
“BANK-x” for bank scan (x= A to Z; programmed bank groups
are only displayed.), “DUP” for duplex scan.
are only displayed.), “DUP” for duplex scan.
r Release [2/SCAN] to start the selected scan.
• Scan pauses when a signal is received.
• Rotate [DIAL] to change the scanning direction, or resumes
• Rotate [DIAL] to change the scanning direction, or resumes
manually.
t To stop the scan, push [VFO/MHz].
The bank-link setting can be changed in scan set mode.
See page 00 for details.
See page 00 for details.
Duplex scan function: Repeatedly scans two frequencies
(transmission/reception) during duplex scan operation.
(transmission/reception) during duplex scan operation.
FM
A
µ
888
148 800
• During all bank/bank link scan • During bank scan
FM
A
µ
A88
148 800
FM
FM
A
146 010
µ
A01
A01
SCAN:ALL
FM
A
148 800
µ
A01
A01
SCAN:BANK-LINK
FM
A
148 800
µ
A01
A01
SCAN:BANK-A
P SKIP
SKIP
P SKIP
SKIP
P SKIP
SKIP
¥ All bank scan selection
¥ Bank scan selection
¥ Bank link scan selection
Selectable between A to Z
if programmed
if programmed
[DIAL]