ICOM 288800 Manuale Utente

80

9

SCAN OPERATION

t Push and hold [MR/S.MW] for 1 sec. to store the skip con-

dition into the memory.

• “SKIP” or “P SKIP” indicator appears, according to the skip se-

lection in the step r.

✔ CONVENIENT!
Also the skip setting can be set with the following operation
for easy setting.

q Select the desired memory channel to be set as a skip

channel/frequency.

w While pushing [5/SKIP], rotate [DIAL] to select the skip con-

dition from “P SKIP,” “SKIP” and “OFF 

(no indication)

.”

✔ CONVENIENT!
During VFO scanning, such as programmed scan, the skip
setting can be programmed into the highest blank memory
channel which is automatically selected with the following op-
eration.

q Start the VFO scan.

➥ Push 

to select VFO mode.

• Select the desired frequency band with [BAND], if desired.

➥ Set the squelch level.

➥ While pushing and holding [2/SCAN], rotate [DIAL] to

select the desired scanning type.

• “ALL” for full scan; “BAND” for band scan, “PROG-xx (or scan

name if programmed)” for programmed scan (xx= 0 to 24;
programmed scan edges numbers are only displayed), “DUP”
for duplex scan.

➥ To start the scan, release [2/SCAN].

• Scan pauses when a signal is received.
• Rotate [DIAL] to change the scanning direction, or resumes

manually.

w When scan pauses and you want to set the paused fre-

quency as a skip frequency.

➥ Push and hold [5/SKIP] for 1 sec. to store the paused

frequency into the highest blank memory channel.

• While pushing and holding [5/SKIP], scan pauses; and after

writing the frequency, scan resumes.

FM

FM

A

µ

SKIP

SKIP

033

033

FM

FM

A

µ

P SKIP

SKIP

033

033

SKIP  appears

P SKIP  appears