ICOM 297000 Manuale Utente
18
2
SETTING A FREQUENCY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■ Tuning step selection
Tuning steps are the minimum frequency change increments
when you rotate [DIAL] or push [Y]/[Z] on the microphone.
Independent tuning step for the left and right, as well as each
frequency bands can be set for individual tuning convenience.
The following tuning steps are available.
when you rotate [DIAL] or push [Y]/[Z] on the microphone.
Independent tuning step for the left and right, as well as each
frequency bands can be set for individual tuning convenience.
The following tuning steps are available.
• 5 kHz*
• 6.25 kHz*
• 10 kHz
• 12.5 kHz
• 15 kHz*
• 20 kHz
• 25 kHz
• 30 kHz
• 50 kHz
*Not selectable in 900 MHz band.
☞NOTE: For convenience, select a tuning step that matches
the frequency intervals of repeaters in your area.
q Push the desired band’s [MAIN•BAND] to select the main
band.
• Push the same band’s [V/MHz•SCAN] to select VFO mode, if
necessary.
w Push [F•
] to display the function guide.
e Push [TS](M/CALL•MW) (Left band’s) to enter tuning step
set mode.
r Rotate the same band’s [DIAL] to select the desired tun-
ing step.
t Push [F•
] to exit tuning step set mode.
[TS](M/CALL•MW)
[F• ]