ICOM 301500 Manuale Utente
9
q TUNER CONTROL SOCKET [TUNER] (p. 16)
Accepts the control cable from an optional AH-4
HF
/
50
MH
z
AUTOMATIC
ANTENNA
TUNER
w GROUND TERMINAL [GND] (p. 12)
Connect this terminal to a ground to prevent elec-
trical shocks, TVI, BCI and other problems.
trical shocks, TVI, BCI and other problems.
e DC POWER SOCKET [DC 13.8V] (p. 15)
Accepts 13.8 V DC through the supplied DC power
cable.
cable.
Rear panel view
r USB JACK [
]
Connect the USB cable to be used for the modula-
tion input (p. 77), the transceiver operation with PC
(available in the near future), etc.
tion input (p. 77), the transceiver operation with PC
(available in the near future), etc.
t EXTERNAL SPEAKER JACK [EXT SP] (p. 91)
Connect a 4–8
ø external speaker, if desired.
•
When an external speaker is connected, the internal
speaker does not function.
speaker does not function.
y CI-V REMOTE CONTROL JACK [REMOTE] (p. 88)
± Designed for use with a PC for remote control of
the transceiver functions.
± Used for transceiver operation with another
Icom CI-V transceiver or receiver.
u ANTENNA CONNECTOR [ANT] (p. 13)
Accepts a 50
Ω antenna with a PL-259 connector
and a 50
Ω coaxial cable.
i ALC INPUT JACK [ALC] (p. 17)
Connects to the ALC output jack of a non-Icom lin-
ear amplifier.
ear amplifier.
o SEND CONTROL JACK [SEND] (p. 17)
Goes to ground while transmitting to control exter-
nal equipment such as a linear amplifier.
nal equipment such as a linear amplifier.
• Max. control level: 16 V DC/0.5 A
!0 ELECTRONIC KEYER JACK [KEY]
Accepts a key or paddle connector for the internal
electronic keyer.
electronic keyer.
•
The keyer type selection between the internal elec-
tronic keyer and straight key operation can be made in
set mode.
tronic keyer and straight key operation can be made in
set mode.
When connecting
a straight key
a straight key
When connecting
a paddle
a paddle
(dot)
(com)
(dash)
(com)
(dash)
(
)
If you use an external electronic keyer, make
sure the output voltage of the keyer is less than
0.4 V when keying the transmitter.
0.4 V when keying the transmitter.
!1 ACCESSORY SOCKET [ACC] (p. 10)
Enables connection to external equipment such as
a TNC for data communications, a linear amplifier
or an automatic antenna tuner, etc.
a TNC for data communications, a linear amplifier
or an automatic antenna tuner, etc.
• See page 10 for socket wiring information.
DC 13.8V
ACC
KEY
SEND
ALC
ANT
REMOTE E X T SP
GND
TUNER
q
w
e
r
t
y
y
u
i
o
!0
!1
N Rear panel
1
PANEL DESCRIPTION