ICOM 301500 Manuale Utente
11
• MICROPHONE CONNECTOR
(Front view)
y GND (PTT ground)
t PTT
r Squelch switch
q Microphone input
w +8 V DC output
e Frequency up/down
i AF output
(varies with [AF])
(varies with [AF])
u GND
(Microphone ground)
[MIC]
PIN NO.
FUNCTION
DESCRIPTION
w
+8 V DC output
Max. 10 mA
e
Frequency up
Ground
Frequency down
Ground through 470
˘
r
Squelch open
“LOW” level
Squelch close
“HIGH” level
CAUTION:
DO NOT short pin 2 to ground as
this can damage the internal 8 V regulator. DC
voltage is applied to pin 1 for microphone opera-
tion. Use caution when using a non-Icom micro-
phone.
voltage is applied to pin 1 for microphone opera-
tion. Use caution when using a non-Icom micro-
phone.
• HM-36 SCHEMATIC DIAGRAM
+
q
w
e r t
y
u
i
4700pF
0.33μF
MICROPHONE
MIC
ELEMENT
ELEMENT
2k
ø
470
ø
DOWN
UP
PTT
RECEIVE
TRANSMIT
MICROPHONE CABLE
MICROPHONE PLUG
1k
ø
+
10μF
q UP/DOWN SWITCHES [UP]/[DN]
Change the selected readout frequency or memory
channel.
channel.
•
Pushing the switch continuously changes the frequency
or memory channel number continuously.
or memory channel number continuously.
•
The [UP]/[DN] switch can simulate a key paddle. Select
in set mode (U/D KEY; Mic Up/Down Keyer). (p. 80)
in set mode (U/D KEY; Mic Up/Down Keyer). (p. 80)
•
While pushing and holding
RIT
*, push the [UP]/[DN]
switch to control the transmit readout frequency while
in spilt frequency operation.
in spilt frequency operation.
* Available only when the XFC (transmit frequency
check) function is turned ON. (p. 76)
w PTT SWITCH
Push and hold to transmit; release to receive.
e PTT LOCK SWITCH (SM-20 only)
Push to lock the PTT switch to the transmission
codition.
codition.
q
w
q
w
e
N Microphones
D HM-36
D SM-20
(Option)
1
PANEL DESCRIPTION