ICOM 301500 Manuale Utente
62
7
MEMORY OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
N
Memory channel programming can be performed
either in VFO mode or in memory mode.
either in VFO mode or in memory mode.
D Programming in VFO mode
q Push
V/M
to select VFO mode.
w Rotate [DIAL], and push
MODE
to set the de-
sired frequency and operating mode.
e Rotate [M-CH] to select the desired memory
channel.
•
If the RIT control indicator lights red, push
M-CH/RIT
SET
.
(p. 61)
•
“
” appears if the selected memory channel is a
blank channel (one without any stored frequencies).
Channel decreases
Channel increases
RIT control indicator
goes out
goes out
r Push and hold
MW
for 1 sec. to program the
displayed frequency and operating mode into the
selected memory channel.
selected memory channel.
•
3 beeps are emitted when memory programming is
successful.
successful.
[EXAMPLE]: Programming 7.088 MHz/LSB
into ch 12.
Push
VFO mode
Rotate [DIAL]
Push
Rotate [M-CH]
Push and hold
7.088 MHz/LSB are programmed into ch 12.
D Programming in memory mode
q Push
V/M
to select memory mode.
w Rotate [M-CH] to select the desired memory
channel.
•
If the RIT control indicator lights red, push
M-CH/RIT
SET
.
(p. 61)
•
Memory channel contents appear in the display.
Channel decreases
Channel increases
RIT control indicator
goes out
goes out
e Rotate [DIAL], and push
MODE
to set the de-
sired frequency and operating mode.
•
To program a blank channel, use direct frequency
entry with the keypad. (p. 25)
entry with the keypad. (p. 25)
r Push and hold
MW
for 1 sec. to program the
displayed frequency and operating mode into the
memory channel.
memory channel.
•
3 beeps are emitted when memory programming is
successful.
successful.
[EXAMPLE]: Programming 21.280 MHz/USB
into ch 18.
Push
Memory mode
Rotate [DIAL]
Push
Rotate [M-CH]
Push and hold
21.280 MHz/USB
are programmed into ch 18.