ICOM 301500 Manuale Utente

63

N

The frequency and operating mode in a memory 
channel can be copied to the VFO.

D Copying in memory mode

This is useful for copying a memory channel’s con-
tents (frequency and operating mode) to a VFO while 
operating in memory mode.
This is useful when searching for signals around a 
memory channel frequency.

 NOTE: While operating in VFO mode, pushing 
and holding 

V/M 

 for 1 sec. also copy a memory 

channel’s contents (frequency and operating 
mode) to a VFO.

 When you have changed the frequency or operat-
ing mode in the selected memory channel:

 • 

Displayed frequency and mode are copied.

 • 

 

Programmed frequency and mode in the mem-
ory channel are not copied, and they remain in 
the memory channel.

q  Push 

V/M 

 to select memory mode.

w  Rotate [M-CH] to select the desired memory 

channel to be copied.

 • 

 

If the RIT control indicator lights red, push 

.  

(p. 61)

 

• Set the frequency or operating mode if required.

 • 

 

“

” appears if the selected memory channel is a 

blank channel (and does not have contents). In this 
case copying is not possible.

Channel decreases

Channel increases

RIT control indicator
goes out

e  Push and hold 

V/M 

 for 1 sec. to copy the fre-

quency and operating mode into the VFO A.

 

• 3 beeps are emitted when the copying is successful.

 • 

 

Displayed frequency and operating mode are copied 
to the VFO A.

r To return to VFO mode, push 

V/M 

.

 • 

 

Copied frequency and operating mode appear in the 
display.

 

 

You can return to VFO mode before copying 
the frequency and operating mode in step 

e.

[EXAMPLE]: Copying contents of memory 16.

Operating frequency
Contents of memory 16

: 14.020 MHz/CW
: 14.018 MHz/CW

Push and hold             for 1 sec.,

then push            .

Rotate [M-CH]

7

MEMORY OPERATION