ICOM 301500 Manuale Utente
3
!0 MODE KEY
MODE
(p. 29)
± Push momentarily to cycle through the operating
modes:
USB/LSB
« CW/CW-R « RTTY/RTTY-R « AM
± Push and hold for 1 sec. to toggle the following
operating modes:
USB
¢ LSB (p. 33)
CW
¢ CW-R (Reverse) (p. 35)
RTTY
¢ RTTY-R (Reverse) (p. 39)
•
“CW-R” or “RTTY-R” appears on the display when
reverse mode is selected.
reverse mode is selected.
Undesired modes can be inhibited in set mode.
(p. 81)
(p. 81)
!1 TUNING STEP KEY
TS
(pgs. 26, 27)
± Push to turn the programmable tuning step ON
or OFF.
•
“
√” appears above the 1 kHz indicator when the pro-
grammable tuning step is turned ON and the fre-
quency can be changed in programmed kHz steps.
quency can be changed in programmed kHz steps.
± While the programmable tuning step is turned
ON (“
√” appears), push and hold for 1 sec. to
enter tuning step set mode; push again to return
to normal operation.
to normal operation.
•
0.1, 1, 5, 9 and 10 kHz programmable tuning steps
are available.
are available.
± While the programmable tuning step is turned
OFF, push and hold for 1 sec. to turn the 1 Hz
step ON and OFF.
step ON and OFF.
•
1 Hz indication appears, and the frequency can be
changed in 1 Hz steps.
changed in 1 Hz steps.
!2 PREAMP/ATTENUATOR KEY
P.AMP
ATT
(p. 45)
± Push to turn the preamp ON or OFF.
•
“
” appears on the display.
± Push and hold for 1 sec. to turn the 20 dB atten-
uator ON; push momentarily to turn the attenua-
tor OFF.
tor OFF.
•
“
” appears on the display.
What is the preamp?
The preamp amplifies signals in the receiver front
end (input) circuit to improve the sensitivity. Turn
the preamp ON when receiving weak signals.
The preamp amplifies signals in the receiver front
end (input) circuit to improve the sensitivity. Turn
the preamp ON when receiving weak signals.
What is the attenuator?
The attenuator prevents a strong undesired signal
near the desired frequency or near your location,
such as from a broadcast station, from causing dis-
tortion or spurious signals.
The attenuator prevents a strong undesired signal
near the desired frequency or near your location,
such as from a broadcast station, from causing dis-
tortion or spurious signals.
!3 MAIN DIAL [DIAL]
Changes the displayed frequency and selects val-
Changes the displayed frequency and selects val-
ues for selected set mode items, etc.
!4 FILTER KEY
FILTER
(p. 47)
± Push momentarily to cycle the IF filter settings
between wide, middle and narrow for the se-
lected operating mode.
lected operating mode.
± Push and hold for 1 sec. to enter the filter set
mode.
i7200
MODE
TUNER
TS
FILTER
SPCH
V/M
A/B
SPLIT
M-CL
SCAN
SET
ATT
P.AMP
COMP
VOX
MNF
RIT
1
2
3
4
5
6
7
8
0
50
28
18
14
10
21
24
=
7
3.5
1.8
F-INP
M-CH/RIT
ENT
BAND
GENE
9
.
AGC
MW
ANF
METER
NR
NB
Speaker
Function
Display (p. 7)
Display (p. 7)
!3
@1
!5 !4
!6
!7
!9 !8
@0
!1
!0
!2
N Front panel (Continued)
1
PANEL DESCRIPTION