ICOM 301500 Manuale Utente
76
10
SET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Quick Split
This item turns the quick split function ON or OFF.
When this item is set to ON, push and hold
When this item is set to ON, push and hold
SPLIT
for
1 sec. to set the undisplayed VFO frequency and oper-
ating mode are set the same as the displayed VFO fre-
quency and operating mode.
See pgs. 58, 59 for details.
ating mode are set the same as the displayed VFO fre-
quency and operating mode.
See pgs. 58, 59 for details.
on : The quick split function ON
oF : The quick split function OFF
oF : The quick split function OFF
ON (default)
Split Lock
This item turns the split lock function ON or OFF.
When this item is set to ON, the transmit frequency can
be adjusted by rotating [DIAL] while pushing and holding
When this item is set to ON, the transmit frequency can
be adjusted by rotating [DIAL] while pushing and holding
RIT
* even if the lock function is activated.
* The transmit frequency check function (“XFC”; p. 76) must be
turned ON in advance.
See p. 59 for split frequency operation details.
on : The split lock function ON
oF : The split lock function OFF
oF : The split lock function OFF
OFF (default)
XFC
This item turns the XFC (transmit frequency check) func-
tion ON or OFF.
tion ON or OFF.
on :
The transmit frequency can be monitored while
pushing and holding
pushing and holding
RIT
oF : The transmit frequency check function OFF
NOTE: When the XFC function is turned ON, the RIT
calculation function (p. 44) is not available.
OFF (default)
Auto Tune
The optional AT-180
ANTENNA
TUNER
has an automatic
start capability which starts tuning if the SWR is higher
than 1.5:1.
than 1.5:1.
on :
The automatic tune starts even when the tuner is
turned OFF during HF bands operation.
turned OFF during HF bands operation.
oF :
The tuner remains OFF even when the SWR is poor
(1.5:1)
(1.5:1)
OFF (default)
PTT Tune
Tuning of the internal antenna tuner can be started auto-
matically at the moment [PTT] is pushed after the operat-
ing frequency is changed (more than 1% from last-tuned
frequency).
When an optional AT-180
matically at the moment [PTT] is pushed after the operat-
ing frequency is changed (more than 1% from last-tuned
frequency).
When an optional AT-180
ANTENNA
TUNER
is connected,
the tuner function must be turned ON in advance.
on : Tuning starts when [PTT] is pushed on a new frequency.
oF : Tuning starts only when
oF : Tuning starts only when
TUNER
is pushed.
OFF (default)