ICOM 322800 Manuale Utente
16
4
BASIC OPERATION
New2001
■
Plotter display operation (Continued)
D Setting the display type (North up/COG up)
Select the display type between “North up” and “COG up.”
q
Push [MENU] to enter the Menu mode.
w
Push [
∫
] or [
√
]
to select “North up/COG up,” then push
[ENT].
e
Push [ENT] to select either “North up” or “COG up.”
• You can also select the option by pushing
[
Ω
] or [
≈
].
North up : The top of the plotter display represents North.
COG up : The top of the plotter display represents the di-
rection your course is heading.
r
Push [CLEAR] to save and return to the Menu mode.
t
Push [CLEAR] to exit the Menu mode.
[CLEAR]
[ENT]
[MENU]
[
∫
], [
√
],
[
Ω
], [
≈
]
■
Target list display operation
T
he target list display shows all AIS targets being detected
by the transponder, including their range and bearing infor-
mation.
The AIS target data is sorted by the distance from your ves-
sel, and the closest target is located on the top of the list.
Their range and bearing information is automatically updated
every 5 seconds, then the AIS target data is sorted.
mation.
The AIS target data is sorted by the distance from your ves-
sel, and the closest target is located on the top of the list.
Their range and bearing information is automatically updated
every 5 seconds, then the AIS target data is sorted.
q
Push [DISP MODE] several times to select the target list
display.
display.
w
Push [
∫
] or [
√
] to select the desired AIS target.
e
Push [ENT] to display it’s detail screen. (p. 17)
NOTE: The alarm buzzer sounds when a malfunction oc-
curs or an AIS target is closer than your CPA and TCPA
curs or an AIS target is closer than your CPA and TCPA
settings, depending on the presetting. (pp. 29, 30, 33, 44)
➥
➥
To stop the alarm buzzer, push [CLEAR].
• If the popup screen is displayed, push
[CLEAR] again to turn
it OFF.