ICOM 325000 Manuale Utente
26
5
MEMORY CHANNELS
5
N Transferring memory contents
The contents of programmed memory channels can be
transferred to another memory channels.
transferred to another memory channels.
q Hold down [S.MW](V/M) for 1 second to enter the select
memory write mode.
• 1 short and 1 long beep sounds.
• The “
• The “
” icon and memory channel number blink.
• Do not hold down [S.MW](V/M) for more than 2 seconds.
Otherwise the memory contents will be copied to the VFO.
w Rotate [DIAL] to select a desired memory channel to be
transferred.
e While holding down [MODE], rotate [DIAL] to select the
“CLEAR” item, then release [MODE].
• Pushing [MODE] repeatedly also selects the “CLEAR” item.
rHold down [S.MW](V/M) for 1 second.
• The displayed contents are cleared.
CONVENIENT!:
Instead of doing steps
Instead of doing steps
e and r, while holding down
[FUNC], push and hold [S.MW](V/M) for 1 second also
clears the contents.
clears the contents.
tRotate [DIAL] to select a desired target memory channel.
y Hold down [S.MW](V/M) for 1 second to transfer the con-
tents.
[DIAL]
• Example
Transferring the contents of memory
channel 51 to channel 33.
Steps
q and w
Step
e
Step
r
Step
t
Step
y