ICOM 325000 Manuale Utente
27
5
MEMORY CHANNELS
The contents of programmed memory channels can be
erased or transferred to another memory.
erased or transferred to another memory.
INFORMATION: Even if the memory bank contents are
erased, the memory channel contents still remain pro-
grammed.
erased, the memory channel contents still remain pro-
grammed.
q Select a desired bank contents to be transferred or erased
from the bank.
± Push [V/M] to select the memory mode.
± While holding down [BAND], rotate [DIAL] to select a
± While holding down [BAND], rotate [DIAL] to select a
desired memory bank group.
± Rotate [DIAL] to select the bank channel.
w Hold down [S.MW](V/M) for 1 second to enter the select
memory write mode.
• 1 short and 1 long beep sounds.
• Do not hold down [S.MW](V/M) for more than 2 seconds.
• Do not hold down [S.MW](V/M) for more than 2 seconds.
Otherwise the bank contents will be copied to the VFO.
Push and hold for 1 sec.
• The original memory channel number is automatically dis-
played, then the “
” icon and the memory channel number
blink.
e While holding down [MODE], rotate [DIAL] to select the
“BANK” item.
• Pushing [MODE] repeatedly also selects the “BANK” item.
r While holding down [BAND], rotate [DIAL] to select a
desired bank group to transfer.
• Select the “-- -- -- --” display when erasing the contents from the
bank.
[DIAL]
To transfer the bank contents
in bank E.
in bank E.
To erase
tRotate [DIAL] to select a desired bank channel.
y While holding down [MODE], rotate [DIAL] to select the
“S.MW” item.
• Pushing [MODE] repeatedly also selects the “S.MW” item.
u Hold down [S.MW](V/M) for 1 second to erase or transfer
the bank contents.
N Erasing/transferring bank contents