ICOM 325000 Manuale Utente

46

9

SET MODE

D Display backlighting

The receiver has a backlit display with a 5 seconds timer, for 
dim light operation. The backlighting can be turned ON con-
tinuously or turned OFF, if desired.

• OFF

: Never lights.

• ON

: Lights continuously while receiver power is ON.

• AUTO1 : Lights when an operation is performed, goes 

out after 5 seconds. (default)

• AUTO2 : Lights when an operation is performed, goes out 

after 5 seconds. However, while operating with an 
external DC power source, the backlight stays ON. 

D Power save

The power save function reduces the current drain to con-
serve battery power. This power save function can be turned 
OFF, if desired. 
In the default setting (“ON”), the power save function is acti-
vated in 1:4 

(125 msec.: 500 msec.)

 ratio when no signal is 

received for 5 seconds. The ratio becomes 1:8 

(125 msec.: 1 

sec.)

 when no signal is received for another 60 seconds.

D Antenna selection

Independently select the antenna to use for AM or FM 
broadcast band reception.

• EXT : Uses the antenna connected to the antenna con-

nector. (default)

• BAR : Uses the internal bar antenna for the AM broad-

cast band reception. (This selection appears 
only when accessing the Set mode in the AM 
broadcast band mode.)

• EAR : Uses the connected earphone’s wire as the 

antenna for FM broadcast band reception. (This 
selection appears only when accessing the Set 
mode in the FM broadcast band mode.)