ICOM 325000 Manuale Utente

SET MODE

D Auto power OFF

The receiver can be set to automatically turn OFF, and
sound a beep, after a specified period when no key opera-
tions are performed.

OFF (default), times of 30 minutes, 1 hour, 1.5 hours, 2
hours and BUSY can be specified. The (repetitive) period
is retained even when the receiver is turned OFF, even by
the auto power OFF function. To cancel the function, select
“OFF”.

D Scan pause timer

Selects the scan pause time. When receiving signals, the
scan pauses according to the scan pause time.

• 2–20

: The scan pauses for 2–20 seconds on a

received signal, and is selected in 2 second
steps. (default: 10 seconds)

• HOLD : The scan pauses on a received signal until it

disappears. Rotate [DIAL] to resume manually.

D Scan resume timer

Selects the scan resume time. The scan resumes after the
speciﬁed period after the received signal disappears.

• 0

: The scan resumes immediately after the

received signal disappears.

• 1–5

: The scan pause 1–5 seconds after the received

signal disappears. (default: 2 seconds)

• HOLD : The scan pauses on the received signal, even

if it disappears. Rotate [DIAL] to resume manu-
ally.

D Scan stop beep

Turns the scan stop beep function ON or OFF (default).
When the function is activated (“ON” is selected), a long
beep will sound each time when signal is received during a
scan.