ICOM 325100 Manuale Utente
11
3
BASIC OPERATION
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
NAR
MID
LOW
■ Selecting output power
The IC-2300H has 4* output power levels to suit your
operating requirements. Lower output powers during
short-distance communications may reduce the pos-
sibility of interference to other stations and will reduce
current consumption.
operating requirements. Lower output powers during
short-distance communications may reduce the pos-
sibility of interference to other stations and will reduce
current consumption.
*The Taiwan version has only 3 output power level options.
➥ Push [LOW] one or more times to select the output
power.
•
The output power can be changed even while
transmitting.
transmitting.
• OUTPUT POWER (approximately)
USA, Export
Taiwan
Korea
High:
65 W
24 W
50 W
Mid:
25 W
10 W
25 W
Mid-Low:
10 W
–
10 W
Low:
5 W
5 W
5 W
Using the HM-133V
➥ Push [HIGH]
for high output power; [MID]
for mid-low output power (push again for mid output
power); and [LOW]
power); and [LOW]
for low output power.
•
When using the microphone, output power can be
changed only while receiving.
changed only while receiving.
■ One-touch PTT function
The PTT switch can be operated as a one-touch PTT
switch (each push switches between transmit and re-
ceive). Using this function you can transmit without
holding down the PTT switch.
To prevent accidental continuous transmissions with
this function, the transceiver has a time-out timer. See
page 48 for details.
switch (each push switches between transmit and re-
ceive). Using this function you can transmit without
holding down the PTT switch.
To prevent accidental continuous transmissions with
this function, the transceiver has a time-out timer. See
page 48 for details.
z Push [FUNC]
then [PTT-M]
to turn ON the
One-Touch PTT function.
• The activity indicator lights green.
x Push [PTT] to transmit and push again to receive.
•
•
Two beeps sound when transmit starts, and a long
beep sounds when returning to receive.
beep sounds when returning to receive.
•
The “
$” icon blinks while the One-Touch PTT
function is ON.
c Push [FUNC]
then [PTT-M]
to turn OFF
the One-Touch PTT function.
• The activity indicator goes out.
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO
MUTE
NAR
NAR
MID
LOW
The selected output power is displayed here.
(If “High” is selected, no icon is displayed.)
(If “High” is selected, no icon is displayed.)
1
00
2
3
4
5
6
7
8
9
10
11
12
13