ICOM 325100 Manuale Utente

15

4

■ Frequency Offset  

When communicating through a repeater, the transmit 
frequency is shifted up or down from the receive fre-
quency.

q  Push [SET] to enter the Set mode.

w  Push [SET] or [MONI] until the “±” icon and the fre-

quency offset appear.

e  Rotate [DIAL] to set the desired frequency offset.
 • 

 

Push [V/MHz] one or more times, to toggle the fre-
quency step between 1 kHz and 1 MHz.

r  Push any key other than [SET] or [MONI], to save 

the selection and exit the Set mode.

z Push [SET] 

 to enter the Set mode.

x  Hold down [SET] 

 or [ENT] 

 until the “±” icon 

and the frequency offset appear.

c Push [Y] or [Z] to set the desired offset.
 • 

 

The frequency cannot be directly entered using the 
keypad.

v  Push  [CLR] 

 to save the selection and exit the 

Set mode.

■ Repeater Lockout

This function helps prevent interference to other sta-
tions by inhibiting transmitting when a signal is re-
ceived. The transceiver has two inhibiting conditions, 
repeater and busy.

q Push [ ] to turn OFF the power.

w  While holding down [SET], push [ ] to turn ON the 

power and enter the Initial Set mode.

e  Push [SET] or [MONI] until “RLO” appears.

r  Rotate [DIAL] to select the Repeater Lockout func-

tion option of “RP,” “BU” or “OFF.”

 • 

“OF”: 

 

The Repeater Lockout function is OFF.

 • 

“RP”: 

 

Transmit is inhibited when a signal with an 
un-matched subaudible tone is received.

 • 

“BU”: 

 

Transmit is inhibited when a signal is re-
ceived.

t  Push [ ] to save the selection and exit the Initial Set 

mode.

Push          to enter the Set mode,

The Repeater Lockout function OFF (default)