ICOM 325100 Manuale Utente

21

5

MEMORY OPERATION

■ Programming channel names 

Each memory channel and the Call channel can be 
programmed with an alphanumeric channel name, for 
easy recognition. Names can be a maximum of 6 char-
acters— see the table to the right, for the selectable 
characters.

q Push [M/CALL] to select the memory mode.

w Rotate [DIAL] to select the desired memory channel.

e  Hold down [ANM] (MONI) for 1 second to switch the 

channel name display. 

  • Two beeps sound.
 • 

 

The name is displayed, if programmed.

r  Push [SET] to enter the channel name programming 

mode.

t Rotate [DIAL] to select a character.
  • The selected character blinks.
y  Push [SET] or [MONI] to move the cursor to the left 

or right.

u  Repeat steps t and y, until the desired channel 

name is completed.

i  Push any key other than [SET] or [MONI], to pro-

gram the name and exit the channel name program-
ming mode.

   •  To switch to the frequency display, hold down 

[MONI] (ANM) for 1 second again.

  IMPORTANT!: While the channel name display 

mode is selected, and when [SET] is pushed, the 
channel name programming mode is always ac-
cessed. 

  To access the Set mode, cancel the channel name 

display by holding down [MONI] (ANM) for 1 second.

z  Select the memory or Call channel to be assigned 

the memory name.

x  Push [FUNC] 

, and then push [ANM] 

.

 • 

 

The name is displayed, if programmed.

c Push [SET] 

.

v Push [Y] or [Z] to select the desired character.
  • The selected character blinks.
b  Push [SET] 

 or [ENT] 

 to move the cursor to 

the left or right.

n  Repeat steps v and b until the desired channel 

names are completed.

m  Push  [MW] 

 to program the name and exit the 

channel name programming mode.

,  If desired, push [FUNC] 

, and then push [ANM] 

 

to return to the frequency display.

(1)

(B)

(L)

(V)

(+)

(,)

(.)

(2)

(C)

(M)

(W)

(–)

(3)

(D)

(N)

(X)

(=)

(4)

(E)

(O)

(Y)

(

✱)

(5)

(%)

(&)

(’)

(F)

(P)

(Z)

(/)

(])

(^)

(:)

(;)

(<)

(>)

(?)

(@)

([)

(\)

(6)

(G)

(Q)

(space)

(7)

( ( )

(H)

(R)

( ) )

(8)

(I)

(S)

(!)

(”)

(#)

($)

(9)

(J)

(T)

(0)

(A)

(K)

(U)

[i.e.]:  Programming “CLUB” into memory channel 5.

Push any other keys than [SET] or [MONI].

Select memory channel 5, and then hold down [ANM] (MONI) for 1 second.

Rotate [DIAL] to select the character, 
and then push [SET] or [MONI] to move the cursor.

Repeat until the name is complete.

Push [SET].

Channel name display
(The name is displayed, if programmed.)

[i.e.]:  Programming “CLUB” into memory channel 5.

Select memory channel 5, push         then        .

Push       .

Push            /            to select the character, 
and then push        or        to move the cursor.

Repeat until the name is complete.

Channel name display
(The name is displayed, if programmed.)

Push        .