ICOM 325300 Manuale Utente

27

5

REPEATER AND DUPLEX OPERATIONS

N Auto repeater function

The U.S.A. and Korean versions automatically use standard 
repeater settings 

(duplex ON/OFF, duplex direction, tone encoder 

ON/OFF)

 when the operating frequency falls within or outside 

of the general repeater output frequency range. The offset 
and repeater tone frequencies are not changed by the auto 
repeater function. Reset these frequencies, if necessary.

D Frequency range and offset direction

439.000–440.000 MHz

“DUP–” appears

q  While continuing to push [SET], turn the power ON to 

enter the Initial set mode.

w  Rotate [DIAL] to select the auto repeater set item, then 

rotate [VOL] to set the auto repeater setting.

 

  • “R1”    : Activates duplex only. (default)

 

  • “R2”    : Activates duplex and tone.

 

  • “OFF” : Auto repeater function is turned OFF.

 

  • “On”    : Activates duplex and tone. (default)

 

  • “OFF” : Auto repeater function is turned OFF.

[VOL]

[DIAL]

U.S.A. version

Korean version

Auto repeater setting

e  Push [ ] to return to the frequency display.

147.000–147.395 MHz

“DUP” appears

442.000–444.995 MHz

“DUP” appears

447.000–449.995 MHz

“DUP–” appears

145.200–145.495 MHz
146.610–146.995 MHz

“DUP–” appears