ICOM 325300 Manuale Utente

29

6

N General description

The IC-T70A/T70E has 300 memory channels, and 2 call 
channels. Memory channels include 50 scan edge memory 
channels

(25 pairs)

 for storage of often-used frequencies.

Also, 26 memory banks, A to Z, are available in each band for 
storing groups of frequencies, etc. Up to 100 channels can be 
assigned to a bank.

D Memory channel contents

The following information can be programmed into memory 
channels:

• Operating frequency 

(p. 20)

• Operating mode 

(p. 21)

• Duplex direction 

(+DUP or –DUP)

 with a frequency offset 

(p. 26)

• Reverse duplex function ON/OFF 

(p. 26)

• Subaudible tone encoder 

(p. 24)

, tone squelch or DTCS 

squelch ON/OFF 

(p. 70)

• Subaudible tone frequency 

(p. 53)

, tone squelch fre-

quency or DTCS code with polarity 

(p. 53)

• Scan skip setting 

(p. 46)

• Memory bank 

(p. 32)

• Memory name 

(p. 34)

• Tuning step 

(p. 19)

• Output power 

(p. 22)

NOTE: Memory data can be erased by static electricity, electric transients, etc.
In addition, they can be erased by malfunction and during repairs. Therefore, we recommend that memory data be written down 
or be saved to a PC using the CS-T70 

CLONING SOFTWARE

.

N Selecting a call channel

q  Push [V/M/C] to select call channel mode.

• Pushing [V/M/C] toggles between the VFO mode, the memory 

channel mode, call channel mode and weather channel mode*.

*Only the U.S.A. version transceiver.

w  Rotate [DIAL] to select a desired call channel.

• “C0” and “C1” are selectable.

[DIAL]

VHF band call channel

UHF band call channel