ICOM 325300 Manuale Utente

31

6

MEMORY/CALL CHANNELS

qPush [V/M/C] to select the VFO mode.

wSet a desired frequency:

± Select a desired band with [BAND].
± Set a desired frequency with [DIAL].
± Or set a desired frequency with keypad directly.
   In this case, the band and frequency settings with 

[BAND] and [DIAL] as above are not required.

± Set other data (e.g. frequency offset, duplex direction, 

tone squelch, etc.), if desired.

e  Push and hold [S.MW](V/M/C) for 1 sec. to enter the select 

memory write mode.

• 1 short and 1 long beep sound.
• “

” icon and memory channel number blink.

rRotate [DIAL] to select a desired channel.

• Call channels (C0, C1), VFO and scan edge channels (0A/0b 

to 24A/24b), as well as regular memory channels, can be pro-
grammed in this way.

tPush and hold [S.MW](V/M/C) for 1 sec. to program.

• 3 beeps sound.
• Memory channel number automatically increases when continu-

ing to push [S.MW](V/M/C) for 1 sec. after programming.

NOTE:  Push  [H/M/L] to cancel to program and exit the 
select memory write mode before memory programming is 
finished.

[DIAL]

The VFO mode

Enter the select memory write mode.

to select channel 11.

Rotate

Push and hold

for 1 sec.

Return to the VFO mode.

Push and hold

for 1 sec. to program.

[EXAMPLE]: Programming 145.440 MHz into memory channel 11 (a blank channel).

Channel 11

N Memory channel programming