ICOM 325300 Manuale Utente

35

6

MEMORY/CALL CHANNELS

N Programming memory/bank/scan name (continued)

[EXAMPLE]: Programming the bank name “VHF” into the 

scan edge channel 1A

N Selecting memory/bank 

During memory mode operation, either the programmed 
memory name or bank name can be displayed.
q  While continuing to push [SET], turn the power ON to 

enter the Initial set mode.

w  Rotate [DIAL] to select the memory name item, then rotate 

[VOL] to set the memory name indication setting.

• “OFF” : Memory name indication is turned OFF.
• “On”    : Activates the memory name indication. (default)

[VOL]

[DIAL]

Memory name setting

e  Push [ ] to return to the frequency display.

Push and hold
for 1 sec.

Push and hold
for 1 sec.

Enter the select memory
write mode.

Push         repeatedly

to select “b nAmE*

2

.”

Push and hold

for 1 sec. to program.

During memory mode, rotate

to select scan edge channel 1A.

Rotate         to select “V,”

then push

.

Select “H” and “F”

with         and

.

*

1

 S nAmE can be set for scan edge channels only.

*

2

 b nAmE can be set for bank assigned channels only.

Select “m nAmE” or “S nAmE*

1

” 

when programming the memory
name or the scan name, respectively.