ICOM 325300 Manuale Utente

36

6

MEMORY/CALL CHANNELS

N Display type

During memory mode operation, the transceiver has 3
display types to suit your operating style. Set the display type 
in the Initial set mode.
q  While continuing to push [SET], turn the power ON to 

enter the Initial set mode.

w  Rotate [DIAL] to select the display mode item, then rotate 

[VOL] to set the display type from “FREq,” “CH” or “PRIV.”

[VOL]

[DIAL]

Display mode setting

e  Push [ ] to return to the frequency display.

Displays the programmed fre-
quency. (default)

D i s p l a y s   t h e   m e m o r y   c h a n -
nel number. Only programmed 
memory channels are displayed, 
and modes other than the memory 
mode cannot be selected.

• When the channel number display type is selected, only the 

following functions can be performed.

- Scan function (p. 44) 

- Output power setting (p. 22)

- Monitor function (p. 17)

- Key lock function (p. 21)

- DTMF transmit function (p. 66)
- The scan pause timer setting, the scan resume timer setting, the 

DTMF memory selection, the mic gain setting and the VOX gain 
setting in the Set mode.

Displays the memory channel 
number. Only programmed mem-
ory channels 0 to 5 are displayed, 
and modes other than the memory 
mode cannot be selected.

• When the private channel display type is selected, only the 

following functions can be performed.

- Output power setting (p. 22)

- Monitor function (p. 17)

- Key lock function (p. 21)

- DTMF transmit function (p. 66)