ICOM 325300 Manuale Utente
55
9
SET MODES
D Priority watch (PRIO)
Activates priority watch or priority watch with alert (Bell).
(default:
OFF)
• OFF
: The priority watch is turned OFF.
• On
: The transceiver checks the memory channel frequency
every 5 seconds.
• bELL
: The transceiver checks the memory channel frequency
every 5 seconds. You can be alerted with beeps and
blinking “
blinking “
S.”
D Scan pause timer (PAUSE)
Selects the scan pause time. When receiving signals, the
scan pauses according to the scan pause timer. (default: 10)
scan pauses according to the scan pause timer. (default: 10)
• 2–20
: Scan pauses for 2–20 seconds while receiving a signal
in 2 seconds steps.
• HOLd : Scan pauses on a received signal until it disappears.
D Scan resume timer (RESUME)
Selects the scan resume time from a pause after the received
signal disappears.
signal disappears.
(default: 2)
• 0
: Scan resumes immediately after the received signal
disappears.
• 1–5
: Scan pauses 1–5 seconds after the received signal dis-
appears.
• HOLd
: Scan remains paused on the received signal according
to the scan pause timer even if it disappears. Rotate
[DIAL] to resume manually.
[DIAL] to resume manually.
Scan resume timer must be set shorter than scan pause
timer (previous item), otherwise this timer cannot be acti-
vated.
timer (previous item), otherwise this timer cannot be acti-
vated.
D Program skip scan (P SKIP)
Sets programmed skip scan function ON (default) or OFF for
VFO scan (full scan, programmed scan, etc.) operation.
VFO scan (full scan, programmed scan, etc.) operation.