ICOM 325300 Manuale Utente
56
9
SET MODES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
D Memory bank link function (B LINK)
Sets the memory bank link function ON (default) or OFF. The
link function provides continuous bank scan, scanning all
channels in the selected banks during bank scan.
link function provides continuous bank scan, scanning all
channels in the selected banks during bank scan.
• Bank link setting
q Push and hold [SET] for 1 sec. to enter the bank link
q Push and hold [SET] for 1 sec. to enter the bank link
setting.
w Rotate [DIAL] to select the bank that you want to change
the link setting.
e Rotate [VOL] to select the option.
Setting is OFF
Setting is ON
r Rotate [DIAL] to select next bank and repeat steps w
and
e, or push [BAND] to exit the BANK link setting.
D Program scan link function (P LINK)
Sets the program scan link function. The link function pro-
vides continuous program scan in the selected program scan
number during program scan.
Default settings for LInk0 to LInk9;
PROG 1 to PROG 24 are linked, but PROG 0 is no-linked.
vides continuous program scan in the selected program scan
number during program scan.
Default settings for LInk0 to LInk9;
PROG 1 to PROG 24 are linked, but PROG 0 is no-linked.
• Confirming program scan link
q Rotate [VOL] to select the program scan link number that
q Rotate [VOL] to select the program scan link number that
you want to confirm.
w Push and hold [SET] for 1 sec. to enter the program scan
link setting.
• “LInk” appears.
e Push and hold [SET] for 1 sec., then rotate [DIAL] to
confirm the linked program scans.
r Push [BAND] to exit the program scan link setting.