ICOM 339300 Manuale Utente
1
PANEL DESCRIPTION
1-8
Previous view
Front panel (Controller) (Continued)
q TX ICON
Indicates either the displayed frequency can be
transmitted, or not.
transmitted, or not.
➥ “
” appears while the operating frequency is in
an amateur band.
➥ “
” appears while the operating frequency is
not in an amateur band. However, when the “Band
Edge Beep” item is set to “OFF” in the “Function”
Set mode (p. 85), “
Edge Beep” item is set to “OFF” in the “Function”
Set mode (p. 85), “
” does not appear.
SET
> Function > Band Edge Beep
“LMT” appears while the output power is de-
➥
creased due to the Power FET’s temperature is
high.
“HOT” appears while the transmission is inhibited
high.
“HOT” appears while the transmission is inhibited
➥
due to the Power FET’s temperature is too high.
w MODE ICONS (p. 43)
Displays the selected operating mode.
➥
•
“-D” appears when SSB data, AM data or FM data
mode is selected.
mode is selected.
Touch to enter the Mode selection screen.
➥
•
On the Mode selection screen, touch the block to se-
lect the operating mode.
lect the operating mode.
e PASSBAND WIDTH ICON (p. 75, 77)
Graphically displays the passband width for twin
Graphically displays the passband width for twin
PBT operation and center frequency for IF shift op-
eration.
eration.
r IF FILTER ICON (p. 75, 77)
Shows the selected IF fi lter.
➥
Touch to select one of three IF fi lter settings.
➥
•
The selected fi lter passband width and shifting value
are displayed for 2 seconds on the window.
are displayed for 2 seconds on the window.
➥ Touch for 1 second to display the “FILTER” screen
(Filter) to adjust the fi lter passband width.
➥ When the “FILTER” screen is displayed, touch for
1 second to return to the previous screen.
t QUICK TUNING ICON
Appears when the Quick tuning mode is selected.
Appears when the Quick tuning mode is selected.
•
When “
Z” is displayed, the frequency changes in pre-set
kHz or 1 MHz quick tuning steps. (p. 38)
•
When “
Z” is not displayed, the frequency changes in 10
Hz or 1 Hz steps. (pp. 37, 39)
y FREQUENCY READOUTS
Displays the operating frequency.
➥
Touch the MHz digits to enter the Band selection
➥
screen.
Touch the MHz digits for 1 second to turn the 1
Touch the MHz digits for 1 second to turn the 1
➥
MHz quick tuning mode ON or OFF.
Touch the kHz digits to turn the pre-set kHz quick
Touch the kHz digits to turn the pre-set kHz quick
➥
tuning mode ON or OFF.
Touch the kHz digits for 1 second to enter the Tun-
Touch the kHz digits for 1 second to enter the Tun-
➥
ing step selection screen.
Touch the Hz digits to for 1 second to toggle be-
Touch the Hz digits to for 1 second to toggle be-
➥
tween 10 Hz and 1 Hz steps.
u SD CARD ICON
➥ “ ” appears when an SD card is inserted.
➥ “ ” and “ ” alternately blinks while accessing the
SD card.
i CLOCK READOUT
Shows the current time.
• UTC time or local time can be selected.
o SPLIT ICON (p. 82)
Appears when the Split function is turned ON.
o LOCK INDICATOR (p. 37)
Appears when the Lock function is activated.
Appears when the Lock function is activated.
!0 LOCK ICON (p. 77)
Appears when the Lock function is turned ON.
q
y
w
e
r
t
u i
o
!0
@1
@2
@3
@2
@3
@4
@5
!1
!2
!3
!5
!4
!6
!7
!8
!9
@0
Display
D