ICOM 350000 Manuale Utente
2001 NEW
10
2
BASIC OPERATION
2001 NEW
In the VFO mode, you can set a desired operating fre-
quency, operating mode or split frequency function.
quency, operating mode or split frequency function.
NOTE:
• The VFO mode operation can be disabled by the
“VFO Mode” item of “Setmode.”
(Main Menu > Setmode > Config)
•
While in the VFO mode, the Selcall, ALE features,
Scan function or the Emergency key cannot be
used.
Scan function or the Emergency key cannot be
used.
• Entering the VFO mode
Push
q
[
8
] to enter the Main Menu screen.
Push
w
[
r
] or [
s
] to select “VFO,” and then push
[
4
].
• Frequency setting
Push
q
[A/B](
§§
) to select VFO A or VFO B.
Push
w
[
t
](
§
) or [
u
](
§§§
) to move the cursor to se-
lect the desired digit to be changed.
• The cursor is displayed below the selected digit
.
Push
e
[
r
] or [
s
] to change the digit.
• Direct frequency setting
Push
q
[A/B](
§§
) to select VFO A or VFO B.
Hold down
w
[
4
] for 1 second to enter the direct fre-
quency input mode.
• The previously entered frequency blinks.
Push the keypad to enter the desired frequency.
e
• Push
[
M
] to enter the decimal point.
• Push
[
8
] to delete the number.
• Push
[
t
](
§
) or [
u
](
§§§
) to move the cursor.
Push
r
[
4
] to save the frequency and exit.
[��]
[���]
[�]
/
Keypad
• Turning ON the Split frequency function
Push
q
[
8
] to enter the Main Menu screen.
Select the “VFO Split” item of “Setmode.”
w
q
Push [
r
] or [
s
] to select the item, and then
push [
4
] to open the screen.
(Setmode > Config)
w
Push [
r
] or [
s
] to select “VFO Split,” and then
hold down [
4
] for 1 second.
Push
e
[
r
] or [
s
] to turn ON the function.
• If desired, hold down
[Default](
§§
) for 1 second to re-
turn to the default setting.
Push
r
[
4
] to save the setting, and return to the pre-
vious screen.
Push
Push
t
[
8
] one or more times to exit the Main Menu
screen.
Enter the VFO mode. (See details to the left.)
Enter the VFO mode. (See details to the left.)
y
Push
u
[A/B](
§§
) to select VFO A or VFO B, and sep-
arately set the receive and transmit frequencies.
• The TX frequency appears below the RX frequency
.
• Push
[A/B](
§§
) changes the VFOs between transmit
and receive.
• Hold down
[A/B](
§§
) for 1 second to equalize the trans-
mit frequency to the receive frequency.
• To turn OFF the Split frequency function, set the “VFO
Split” item of “Setmode.” to “OFF.”
(Main Menu > Setmode > Config)
■
VFO operation