ICOM 350000 Manuale Utente
3
11
RECEIVE AND TRANSMIT
2001 NEW
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Quic
k Ref
erence
Basic voice transmit/receive
■
q
First, check the following.
➥
The microphone and external speaker are con-
nected.
➥
No “
S
,” “
L
” or “
V
” mute icon appears.
• If “S
,” “
L
” or “
V
” appears, push [MUTE](
M
) one or
more times to turn OFF the mute.
Mute icon
w
Push [
r
] or [
s
] to select the desired receive chan-
nel.
•
The S-meter shows the signal strength when a signal is
received.
received.
e
Push [
+] or [
–] to adjust the desired audio
level when receiving a signal.
• If the bass or treble of the receive audio is too strong,
push [CLAR](7) to set “Clarifier” to ON, and adjust to
obtain clear audio. (See page 14 for the Clarifier func-
tion details.)
obtain clear audio. (See page 14 for the Clarifier func-
tion details.)
• If the audio is distorted, select the suitable operating
mode. (See page 9 for the Mode selection details.)
r
Push [TUNE](9) to enter the antenna tune mode.
• The “Auto Tune” screen appears.
NOTE:
The antenna tune mode must be set to ON by
the “Tuner” item of “Setmode.” (Default: ON)
(Main Menu > Setmode > Config)
Push
t
[
4
] to start auto tuning.
• The display shows the antenna SWR.
• If the antenna cannot be tuned after 20 seconds, the
• If the antenna cannot be tuned after 20 seconds, the
tuning circuit is automatically bypassed.
• After tuning is finished, the auto tune automatically
stops transmitting.
• If necessary, push
[
8
] to manually stop transmitting.
• Push
[Through](
§§
) to turn OFF the antenna tuner.
After tuning is finished, push
y
[TUNE](9) again to
return to the normal operating screen.
To transmit on the channel, hold down
To transmit on the channel, hold down
u
[PTT] on the
microphone, and speak at a normal voice level.
• The RF meter shows the output power.
Release
i
[PTT] to receive.