ICOM 361500 Manuale Utente

1-4

@3

(p. ?5-12)

Adjusts the continuously-variable AGC circuit time

constant.

 • To  use  [AGC]  control,  push  the  appropriate  band’s

[AGC VR] ([AGC VR] indicator lights white).

@4

 (p. ?5-12)

➥

 

Push to toggle [AGC] control usage ON or OFF.

     • Use  [AGC]  control  to  set  the  AGC  time  constant

when switched ON.

     • The [AGC VR] indicator above this key lights white

when the control is ON.

➥

Turns the AGC function OFF when held down for

1 second.

@5

  Varies  the  audio  output  level  of  the  speaker  or

headphones.

@6

(p. ?3-9)

 Adjusts the RF gain level.

 

While rotating the RF gain control, you may hear

noise. This comes from the DSP unit and does 
not indicate a malfunction.

@7

 

 Push to select the function indicated in the display 

above these keys.

 • Functions vary depending on the operating condition.

@8

 Selects the desired mode. (p. ?3-8)

 • Announces selected mode via the speech synthesizer.

(p. ?12-17)

➥

 

Selects USB or LSB modes alternately.

➥

Selects CW or CW-R

(CW reverse)

modes 

alternately.

➥

Toggles between RTTY and PSK mode.

➥

Toggles  between  RTTY  or  RTTY-R

(RTTY reverse)

 mode when held down for 

1 second in RTTY mode.

➥

Toggles between PSK or PSK-R

(PSK

reverse)

 mode when held down for 1 sec-

ond in PSK mode.

➥

Selects AM or FM modes alternately.

➥

Selects SSB, AM or FM data mode

(USB-

D, LSB-D, AM-D, FM-D)

 when pushed in 

SSB, AM or FM mode, respectively.

➥

Toggles  between  D1,  D2  or  D3  when

held down for 1 second. 

@9

 

Lights red while transmitting.

 • SUB band’s [TX] indicator lights only when in split oper

-

ation.

■

@8

@7

@4

@6

@3

@5

#1

@9

#0