ICOM 375000 Manuale Utente

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the

United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand and/or other countries.

Printed in Japan

1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan

Charging time differs, depending on the battery pack.

NOTE: Operating time or charging time may be shorter

depending on the environment such as roaming fre-

quency.

• The charging time may differ, depending on the remaining

capacity.

• Immediately stop using the battery if it emits an abnormal

odor, heats up, or is discolored or deformed. If any of these

conditions occur, contact your Icom dealer or distributor.

■

Standard charging time

Battery

Spec item

BP-272

Battery type

Li-ion

Capacity

1880 mAh minimun (2000 mAh typical)

Voltage

7.4 V

Dimension

(W×H×D)

58×86.9×14.2 (mm)

(Projections not included)

IP501H

operating

time

17 hours (Approximately)

TX:RX:Stand-by=5 : 5 : 90

Charging

time

2.2 hours (Approximately)

■ Attaching the IP501H to the BC-218

Prior to using the IP501H for the first time, or the

IP501H has not been used for more than 2 months, the

battery pack must be fully charged for optimum life and

operation.

• The charging indicator lights orange while charging,

lights green when the battery pack has been charged.

• If the charging indicator blinks orange, there may

be a problem with the battery pack or charger. If this

occurs, try charging the battery pack alone, without

the transceiver, or try using the standard (non-rapid)

charger. Contact your dealer if you have problems

charging a new battery pack.

• The charger automatically restarts charging when the

attached battery pack starts discharge.

• Disconnect the AC cable from the outlet when the

charger is not in use.

• Do not disconnect the DC power cable from the BC-

128 when using the Bluetooth device. Otherwise the

Bluetooth communication is disconnected.

• NEVER charge or leave the battery pack in areas with

extremely high temperatures, such as near fires or

stoves, inside a sun-heated vehicle, or in direct sun-

light.

• Do not insert the BP-273A to the BC-218.

Attach the belt clip, then insert the IP501H into the BC-218

until it is locked in place.

Bluetooth

rapid charger

(optional BC-218)

Charge indicator

Battery pack

Terminal + battery pack

Charging: Orange

Charged: Green

Cigarret lighter cable

(Optional CP-22 or CP-23L)

can be used.

AC outlet

Power adapter for BC-218

(Optional BC-216S)

■ Charging

Removing

Supplied belt clip

Bluetooth

rapid charger

(Optional BC-218)

★ Use 2 tapping screws （3.5×30 mm: purchase separately）.

■ Attaching the HM-215

When you connect the optional HM-215

s p e a k e r

microphone

to the BC-218, you can wirelessly transmit and

receive the audio by wirelessly connecting the IP501H and

BC-218.

■ Bluetooth® operation

About the Electromagnetic Interference:

When you use a Bluetooth device, pay attention to

the following:

Bluetooth devices operate in the 2.4 GHz band. The

2.4 GHz band is also used by other devices, such

as Wireless LAN products, microwave ovens, RFID

systems, amateur radio stations, and so on.

When using this device near such devices, interfer-

ence may occur, causing a decrease in communica-

tion speed, and an unstable connection.

In such cases, use this device away from the other

devices, or stop using those devices.

NOTE: Refer to the IP501H manual for details including

paring, connecting and operation.

BC-218 (option)

Bluetooth

HM-215 (option)

• You can connect to other Bluetooth wireless technology

enabled devices (Headset or Data) with the installed

Bluetooth unit.

• Only IP501H is guaranteed as of October 2017.

• You may not use this function, depending on the

presetting. Ask your dealer for detail.

• The communication range of Bluetooth is approximately

10 meters (33 feet).

• Up to 6 Bluetooth devices can be stored on the pairing

device list. But using only one pair of Bluetooth devices is

recommended.

Connect the HM-215 to the BC-218's MIC jack securely, and place the BC-218 on a flat place.

• Do not insert the IP501H into the BC-218 when the BP-273A

battery

case

is attached.

■ BC-218/HM-215 description

RESET button

Speaker microphone

(optional HM-215)

Front view

Rear view

DC jack

External speaker jack

MIC jack

Bluetooth button

Supplied belt clip

Charging Indicator

Bluetooth connection indicator

PTT

Microphone

TX indicator

Speaker

Volume

（Down/Up）

Charging: Orange

Charged: Green

Connects the AC adapter (BC-216S), cigarret lighter
cable (CP-22, CP-23L).

Connect the optional SP-35.

Hold down for 3 seconds to turn the
Bluetooth function ON or OFF.

※Hold down for 6 seconds to enter

to the Paring mode.

Bluetooth function is ON:

Blinks blue

Bluetooth function is OFF: OFF
In the Paring mode:

Blinks alternately red and blue

Initializing the paring list:

Purple

Transmitting:

Blinks alternately red, blue, blue

Bluetooth function is ON:

Blinks blue

Bluetooth function is OFF: OFF
In the Paring mode:

Blinks alternately red and blue

Initializing the paring list:

Purple

Transmitting:

Blinks alternately red, blue, blue

When the Buluetooth functin is
malfunctioning, push here to reset
the unit.

Light orange when PTT on the
HM-215 is pushed.

IP501H

Bluetooth button

Hold down for 3 seconds to turn the
Bluetooth function ON or OFF.
•Hold down for 6 seconds to enter
to the Paring mode.