ICOM 375410 Manuale Utente
19
3
BASIC OPERATION
201802
BASIC MANUAL
■
Dualwatch function
Dualwatch function simultaneously monitors two
frequencies. The IC-R30 has 2 independent receiver
circuits, A band and B band. You can set different
frequencies or receive modes in each band.
L
In the A band, you can select any frequency. In the B
band, you can select only the AIR, 146 M, 370 M, or 440 M
frequency bands.
L
When the Dualwatch function is ON, the audio output
may be interrupted when the frequency is switched while
scanning, or by other factors.
D
Turning Dualwatch function ON or OFF
Hold down [DUAL] for 1 second to turn the Dualwatch
function ON or OFF.
L
Information
•When the Dualwatch function is ON, the display shows the A
band in the upper half and the B band in the lower half.
•“MAIN” is displayed on the MAIN band where you can
change the settings.
•When the Dualwatch function is OFF, the display shows only
the MAIN band. Push [MAIN] to select A or B band.
•The SUB band can be automatically muted.
([MENU] > Sounds >
Sub Band Mute (Main RX))
Single band display
(Dualwatch function OFF)
TIP: Depending on the receive mode, the SUB band audio
signal is muted. In such case, “
” is displayed.
•
SUB band mute status
MAIN band
SUB band
LSB/USB
Digital modes*
CW/CW-R
Digital modes*
*Except when D-STAR is selected on the Dualwatch screen.
Dual band display
(Dualwatch function ON)
MAIN
band
SUB
band