ICOM 375410 Manuale Utente
18
3
BASIC OPERATION
3
201802
201802
BASIC MANUAL
■
DIAL/VOL Switch function
You can switch the functions assigned to [DIAL] and
[▲]/[▼].
z
Push [DIAL SEL] to switch the functions assigned to
[DIAL] and [▲]/[▼].
L
Information
•“
” is displayed when the Volume Adjustment
function is assigned to [DIAL].
•Push [DIAL SEL] again to return to the previous setting.
•Even if the Volume Adjustment function is assigned to
[DIAL], you can set a squelch level by using [DIAL].
•In this manual, all instructions are described without this
setting.
■
Attenuator
The Attenuator prevents a desired signal from becoming
distorted when a very strong signal is near the frequency,
or when near a very strong electric field.
1. Push [ATT].
•The Attenuator options are displayed.
2. Set the Attenuator level to between “ATT1” to “ATT3.”
L
The higher the level, the larger the attenuation amount
becomes.
[DIAL SEL]
[ATT]
■
Setting the RF gain
Set the sensitivity level to receive. Normally, set the RF
gain to maximum (“RFG MAX”).
1. Push [QUICK].
2. Select “RF Gain,” and then push [ENTER].
3. Select the level.
L
Options: “RFG1” ~ “RFG9” and “RFG MAX” (default)
L
When “RFG MAX” is selected, nothing is displayed.