ICOM 382200 Manuale Utente

14

5

BASIC OPERATION

■ Receiving and 

CAUTION: Transmitting without an antenna may damage 
the transceiver.

1. 

 Push [▲] or [▼] to select the channel to call.

L You cannot transmit on Channel 70.
L

 is displayed while receiving a signal.

2.   Hold down [PTT] and speak into the microphone.

 

•

 is displayed while transmitting.

3.  Release [PTT] to receive.

Hold down to transmit.
Release to receive.

Select a channel.

Speak into the microphone

TIP: To maximize the readability of your transmitted signal, 
pause for a second after pushing [PTT] and hold the 
microphone 5 to 10 cm (2 to 4 inches) from your mouth, 
and then speak at your normal voice level.

 

•  To conserve battery power, the Power Save function 

automatically turns ON when no signal is received for 5 
seconds.

 

•  When the temperature is extremely high, the battery 

protection function automatically sets transceiver power 
to Low, and disables High power selection.

 

•  Except for the Export version, the Time-out Timer function 

cuts OFF transmission after 5 minutes of continuously 
transmitting, to prevent prolonged transmission.

 

•  The Noise Cancel function reduces random noise 

components in the transmit and/or received signal.  
See page 56 for details.

■ Lock function

The Lock function electronically locks all keys except for  
[ ], [PTT], and [DISTRESS]. This function enables you to 
prevent accidentally changing the channel, or accessing the 
functions.

Hold down [CLR

 

é

] for 1 second to turn the Lock function 

ON or OFF.

 

•  

 is displayed on the bottom of the display while 

the Lock function is ON.