ICOM 382200 Manuale Utente

17

6

SCAN (Except for the Dutch version)

■ Starting a scan

1.  Select a Channel Group. (p. 12)

2.  Push [◄] or [►] to display 

.

3.  Push the software key below 

.

 

•

The scan starts.

 

•

 “

” is displayed during a Priority Scan, and  

“

” is displayed during a Normal Scan.

L

 When a signal is received, the scan pauses until the signal 

disappears, or resumes after 5 seconds, depending on the 

Scan Timer setting in “Radio Settings.”

L

 A beep sounds and “16” blinks when a signal is received on 

Channel 16 during a Priority scan.

4.  To stop the scan, push the software key below 

.

■ Setting 

You can quickly recall often-used channels by setting them 

as Favorite channels. You can set Favorite channels in each 

Channel Group.
1.  Select a Channel Group. (p. 12)

2.   Push [▲] or [▼] to select the channel you want to set as 

a Favorite channel.

3.  Push [◄] or [►] to display 

.

4.   Hold down the software key below 

 for 1 second.

 

•

 The selected channel is set as a Favorite channel, and  

“ ” is displayed.

L

To cancel the setting, hold down the key again for 1 second.

 You can set all channels as Favorite channels, clear all 

settings, or reset to the default. By default, some channels 
are preset as Favorite channels. The preset channels differ, 
depending on the transceiver version.

: In order to properly receive signals, be sure to adjust the 

squelch to a suitable level.

Example: Starting a  

Normal Scan

Push to start

When a signal is received

“

” and “

” are displayed.

While scanning

“

” is displayed.