ICOM 382200 Manuale Utente
31
8
DSC OPERATION
D
Sending a Test Acknowledgement
By default, when you receive a Test call, the Auto ACK
function automatically sends an Acknowledgement to the
calling station (p. 42). If the function is set to “Manual,” do
the following steps to send an Acknowledgement.
1.
After a Test call is being received, push any software
key to turn OFF the alarm.
2.
Push the software key below [ACPT].
• The received call’s information is displayed.
L
L
If you want to send an “Able to comply” Acknowledgement
right away, push the software key below [ABLE].
3.
Push the software key below [ACK].
•
The “Test ACK” conirmation screen is displayed.
4.
Push the software key below [CALL] to send the
Acknowledgement.
•
“Transmitting Test ACK” is displayed.
5.
Push the software key below
[EXIT].
•
A confirmation screen is displayed.
6. Push the software key below [OK]
to return to the operating screen.