ICOM 382200 Manuale Utente
33
8
DSC OPERATION
4.
Select the reply “Able to Comply.”
L
Select “Unable to Comply” if you cannot send a reply call.
5.
Push the software key below [CALL] to send the reply.
• “Transmitting Position Reply” is displayed.
•
After sending, the replied information is displayed.
6. Push the software key below [EXIT]
to return to the operating screen, or
below [RESEND] to resend.
below [RESEND] to resend.
•
A confirmation screen is displayed.
7.
Push the software key below [OK]
to return to the operating screen.
to return to the operating screen.
D
Sending a Position Reply call (Continued)
Sending on the “Compose Other” screen
You can also send a Position Reply call by selecting
You can also send a Position Reply call by selecting
“Position Reply” on the “Compose Other” screen.
This enables you to reply even after ignoring the call when
you irst received it.
1.
Push the software key below
.
•
The ”Compose Other” screen is displayed.
2.
Push [▲] or [▼] to select “Position Reply,” and then
push [ENT].
push [ENT].
•
The caller’s station or MMSI is displayed.
L “Position Reply” is not displayed if no Position Request call
has been received.
3.
Select the station to send a Position Reply call to, and
the push [ENT].
the push [ENT].
4.
Repeat steps 4 to 7 described in the left column.
TIP
: If no valid position is received while selecting [ACPT]
in step 2, and selecting “Able to Comply,” the position and
time entry screen is displayed.
time entry screen is displayed.
L
See “Entering the position and time” on page 22 for details.