ICOM 398000 Manuale Utente

27

New2001

12

The transceiver does 

not turn ON.

• The battery is exhausted.

• The battery pack is not correctly attached.

•  Recharge the battery pack.

•  Correctly reattach the battery pack.

Little or no sound 

comes from the 

speaker.

• Squelch level is set too high.

• Volume level is set too low.

• The speaker has been exposed to water.

• Adjust the squelch level.

• Adjust the volume level.

•  Use the AquaQuake Water Draining 

function to remove water from the 

speaker grill.

You cannot transmit, 

or cannot select high 

power.

•  Some channels are set for low power or 

receive only by regulations.

• The output power is set to low.

• Change channels.

•  Push [H/L] to select high power.

Scan does not start.

•  More than 2 favorite channels are not set. •  Set the Favorite channels.

No beep sounds.

• The Key Beep function is OFF.

•  Turn ON the Key Beep function.

The keypad and [DIAL] 

does not work.

•  The keypad and [DIAL] is locked.

•  Hold down [    ] for 1 second to lock or 

unlock the keypad.