ICOM IC-703 Manuale Utente

20

3

BASIC OPERATION

When neither the quick tuning step or programmable
tuning step “

Z

” appear, rotating the main dial

changes the frequency in increments of 1 or 10 Hz.
These tuning steps are only available in SSB, CW
and RTTY modes.

qSelect SSB, CW or RTTY mode if necessary.

wPush [TS] for 1 sec. to toggle between the 1 Hz

and 10 Hz step settings.

• When the 1 Hz step is selected, the 1 Hz digit appears

in the frequency indication; when the 10 Hz step is se-
lected, the 1 Hz digit disappears from the frequency in-
dication.

• Rotating the main dial changes the frequency 1 Hz or

10Hz tuning step.

Rotating the main dial
changes the frequency
in 10 Hz steps.

Rotating the main dial
changes the frequency
in 1 Hz steps.

Push

for 1 sec.

[TS]

[MODE]

Main dial

The quick tuning step function allows you to change
the frequency in 1 MHz steps when rotating the main
dial. This function is only available in FM and AM
modes.

qSelect FM or AM mode if necessary.

wPush [TS] momentarily to toggle between the 1

MHz tuning step and the programmable tuning
step.

• “

Z

” appears above the 1 MHz indicator when the 1

MHz tuning step is selected.

• Rotating the main dial changes the frequency 1 MHz or

set tuning step.

Quick tuning step
indicator

Rotating the main dial 
changes the frequency 
in 1 MHz steps.

[TS]

[MODE]

Main dial