ICOM IC-703 Manuale Utente

26

3

BASIC OPERATION

qPush [DISPLAY] for 1 sec. to select quick set mode.

wPush [MENU] one or more times to select “Q1 RF

POWER.”

eRotate the main dial to select the desired output.

• Output power is displayed in 11 steps (L, 1–9 and H)

but is continuously selectable.

rPush [DISPLAY] to exit quick set mode.

• Available power

*Carrier power

Q1 RF POWER

Maximum output 
power is selected.

[DISPLAY]

Main dial

[MENU]

DSetting output power

Microphone gain must be adjusted properly so that
your signal does not distort when transmitted.

qSelect SSB or another phone mode (AM or FM

mode).

wPush [DISPLAY] for 1 sec. to select quick set mode.

ePush [MENU] one or more times to select “Q2

MIC GAIN.”

• The ALC meter is selected automatically when operat-

ing in SSB mode.

rWhile speaking into the microphone adjust the mi-

crophone gain so that the ALC meter does not
peak past the ALC zone.

tPush [DISPLAY] to exit quick set mode.

ALC

ALC zone

Q2 MIC GAIN

Microphone gain 
is set to 5.

[DISPLAY]

Main dial

[MENU]

DSetting microphone gain

13.8 V

0.1–10 W

0.1–4 W

(DC power mode)

9.6 V

0.1–5 W

0.1–2 W

(Battery mode)