Nilfisk-advance Inc. ME401 Manuale Utente

Pagina di 24
 
ME401-9 
 
 
 
 
Nilfisk Advance ME401-9, Technical Manual v1.2, Marts 2014 
  Page 9 
Delivered standard content 
 
The delivered standard package content includes the following items: 
 
1 x GSM/GPS-unit of the model type ME401-9 
 
1 x Mounting cradle 
 
1 x Li-ion Battery (May already be mounted inside the ME401-9 unit) 
 
1 x Fuse with fuse holder 
 
In case the unit is delivered with SIM card from the factory (Either US or EU SIM card 
as indicated on the product label), then the GSM number will be indicated on the 
delivery note as well as on the package itself. 
 
NOTE:  In case the SIM card is delivered from factory it is mounted inside the ME401-9 
unit. 
 
 
Ready-to-Use, No Custom Programming Required 
Simply connect the unit to supply voltage (12 to 48 V DC). In its default configuration, 
reports are sent nominally at 15-minute intervals or faster whenever there is motion. 
  
Upon powering up, the device will self-initialize anywhere in the world and start 
transmitting if an authorized GSM network is available. While a basic understanding of the 
different ME401-9 operational states is helpful, configuring the ME401-9 unit does not 
require a highly skilled software programmer or technician. 
 
 
Cost-effective, Universally Available Communications 
The ME401-9 unit takes advantage of the near universal availability of GSM SMS text 
messaging while also leveraging cost-effective GPRS data rate plans. Typical SMS plans 
offer very extensive inter-network roaming capabilities, both within a host country and 
internationally.  
SMS plans also tend to be too pricey for applications requiring more than a few reports per 
day. GPRS data plans, on the other hand, typically allow for lower recurring 
communication costs although GPRS coverage and roaming can be restricted in some 
areas.  
The ME401-9 unit takes advantage of both technologies by automatically selecting GPRS 
wherever such service is available, while relying upon SMS text messages for 
configuration purpose only. This helps minimize recurring communication costs while 
allowing the greatest coverage possible.