Kodak Alaris 305-PRINTER Manuale Utente

Clean the filter part and the ventilation inlet with a vacuum as shown right.

Alcohol (ethyl alcohol, etc.)

Soft and clean cloth

When lines appear on the printed images, clean the thermal head.

  Wipe the head cleaning part carefully with cloth dampened with a small amount of 

alcohol.

•  Do not damage the thermal head.

•  When the poor print quality is not corrected even if the head has been cleaned, 

replacement of the thermal head may be required. Contact your dealer.

Thermal head is hot right after printing. Wait until the head cools before 

cleaning the thermal head.

The thermal head may be damaged if you touch it while static electricity builds 

up on your body.

When you clean the thermal head, make sure not to apply excessive force to the 

peeling roller on the bottom of the thermal head. When the excessive force is 

applied to the roller, the roller may be deformed, resulting in deterioration of the 

printing quality.

Cleaning as indicated below will help maintain stable printer operation and extend the printer’s life.

Wearing gloves at cleaning is recommended to prevent injury.

Cleaning part of thermal head

Filter (inside)

Thermal head

Ventilation inlet 

Peeling roller